Tag Archives: education

B.A.M. Episode 5: Beef Does Not Cause Cancer

A little over a year ago, the World Health Organization published a finding through their International Agency for Research on Cancer (IARC) that the consumption of red meats represented a “hazard” and classified red meat as “probably carcinogenic.” While the craziness over that fake scare has already passed like a cow fart in the wind, I think it’s useful to talk about it here, even if just to reiterate how wrong it was.

First, I think it’s important to discuss a few things right off the bat.

Okay but seriously…

Difference Between Hazard and Risk: The IARC does not evaluate cancer risks. They only identify hazards. A risk is a statement about the probability, possibility or likelihood to cause harm, while a hazard is merely representative of a possibility to cause harm under any circumstances. It is always important to look at hazard and risk together when talking about things like cancer.

Perhaps the best way to illustrate the difference between the two is by way of analogy. Think about driving, for example. If it’s raining, we know that wet roads represent a hazard to drivers for getting into an accident (cancer). Now let’s say you’re speeding, driving with bald tires, and not using your windshield wipers after drinking a six pack of Bud. You’ve significantly elevated your risk of getting into an accident during hazardous driving conditions like wet roads.

www.vintodphoto.com
www.vintodphoto.com

If we apply this to beef, the IARC merely told you that the roads are wet. They identified a hazard, and nearly anything can be hazardous. Water is hazardous. It only becomes a risk when you try to breathe it, or drink it while hanging upside down or something ridiculous. So, wet roads? Maybe you walk to work, or maybe you have new tires, drive very slowly in the rain and never drive while intoxicated. As a result, your risk of getting into an accident due to a wet road hazard is very low.

See the difference, and the need to always consider both together? Of course you do, because you’re not an idiot. So when we extrapolate this to something complex, like diet or personal health, the need to assess both becomes absolutely vital. If you’re an alcoholic smoker who works around asbestos all day, never exercises, and consumes nothing but bacon grease, then chances are you’re going to die of cancer pretty quickly, because your personal risk levels are through the roof and you’re dancing around several big hazards.

Scope of Study: First, the IARC does not seem to specialize in the evaluation of food. They’ve looked into more than 1000 chemicals, mixtures, biological agents, personal habits and occupational exposures, but diet and food represent large complexities that are simply out of their realm of specialization.

Second, the IARC only categorizes things into five wishy-washy designations: Probably Not Carcinogenic to Humans (Category 4); Not Classifiable as to its Carcinogenicity to Humans (Category 3); Possibly Carcinogenic to Humans (Category 2B); Probably Carcinogenic to Humans (Category 2A); and Carcinogenic to Humans (Category 1). Aside from the fact that language like “probably” and “possibly” is arbitrary at best, only one substance has ever received the Category 4 designation of “Probably Not Carcinogenic,” and that was caprolactam (whatever the fuck that is).

www.vintodphoto.com
www.vintodphoto.com

They claimed that red meat was “probably carcinogenic” (Category 2A) and that processed meats were “carcinogenic” (Category 1). So what do “red meats” and “processed meats” even mean?

According to IARC, red meat refers to “unprocessed mammalian muscle meat.” This means beef, veal, pork, lamb, mutton, horse or goat meat. Yeah, you read that right: Pork is not “the other white meat.” Based on the amount of myoglobin or “stuff that looks like blood, but really isn’t blood” in the muscle tissue, pork is categorized as a red meat.

Processed meat refers to “meat that has been transformed through salting, curing, fermentation, smoking or other processes to enhance flavor or improve preservation.” In the U.S., processed meats like bacon, sausages, hot dogs and deli meats primarily contain pork and poultry, but sometimes contain beef as well.

Note that all production and processing methods fall into these definitions, and that even includes organic, grass-fed, nitrite- and nitrate-free meats, as well as conventional meats. NO ONE IS SAFE FROM THE IARC!!!

DSC04710 test edits

Findings: The findings are based on pre-existing research. What is that research? How can they control for external factors that may increase or decrease risk when studying human diet? Well, according to their Q&A, “In the case of red meat, the classification is based on limited evidence from epidemiological studies showing positive associations between eating red meat and developing colorectal cancer as well as strong mechanistic evidence. Limited evidence means that a positive association has been observed between exposure to the agent and cancer but that other explanations for the observations (technically termed chance, bias, or confounding) could not be ruled out.”

In layman’s terms, that means other factors could have influenced the weak positive associations between red meat and cancer, like poor diet, sedentary lifestyle, obesity, bad habits like smoking or excessive alcohol consumption, or even genetic health conditions or pre-existing diseases (think speeding, driving on bald tires, driving while intoxicated, etc). So there’s that difference between hazard and risk being played out again.

In short, don’t believe the hype!

Research has always shown that beef should be part of a healthy and balanced diet. But don’t just take my word for it; check out what some dietitians think. To me, it’s clear that the scientific evidence doesn’t show that red or processed meat causes cancer. Studies in humans are limited and inconsistent, and evidence has weakened over time. Take a look HERE for research that the Beef Checkoff submitted to the IARC. The Beef Checkoff is an organization that’s funded by farmers giving $1 for every animal produced in order to pay for research and marketing campaigns within the industry. If you think those submissions are biased for some reason (which is silly, because beef farmers and ranchers feed their families with the same beef and have a vested interest in the industry’s safety), then go HERE for independent submissions that were sent to the IARC.

Okay so what about hot dogs and bacon, the “processed meats” that were categorized as being “Carcinogenic?” If you poked around their website you may have noticed that smoking and asbestos are in IARC Category 1 as well. But on their Q&A they’ve explained that eating processed meats is not equally as dangerous as smoking – not even close, as a matter of fact. As I mentioned above, rather than assessing the level of risk, the IARC classifications merely describe hazards and potential causes.

Just one last note here on the findings: every one of us has about a 1.8%-4% chance of getting colon cancer, which is the form of cancer that many of the studies focused upon for red meat. Colon cancer is the third most common cause of cancer and cancer-related deaths. Even if the risk of colon cancer goes up 17-18% due to eating red meat, as some of the more fear-mongering studies said (and recall that some studies said there was no increased risk), it’s only about 17-18% of that 4%, or an increased risk of 0.72%. That’s only 4.72% total, if we use the worst figures we can find. The bottom end all-in figure is more like 2.1%, and again that’s only if we ignore all of the other studies that found no risk in eating red meat.

I don’t know about you guys, but even if these false-positive studies were somehow believable, I’d be perfectly willing to take on a 0.3% to 0.7% risk in exchange for a lifetime of enjoying nutritious and delicious red meat in my diet. The air I breathe here in NYC is probably way more hazardous or risky to me than red meat.

DSC04168 jpg

Charred Crusts: Another concern that was floating around the web was the idea that the charred outer crisp on meats that develops when the meat comes in contact with fire (like the crust of a broiled steak or the smoky crisp on a flame-kissed burger) is also cancerous.

dsc01689

The chemicals that form during this charring process are present on any meat that gets hit with flame (not just beef). They’re called heterocyclic aromatic amines (HAA) and polycyclic aromatic hydrocarbons (PAH).

They are, indeed, known or suspected carcinogens. However, they aren’t present in high enough concentrations to be a real concern when grilling or cooking. I’ve known of people who charred meat to a crisp and tested the meat afterward, and the amounts of harmful chemical present were so small that they were insignificant. Concentrations matter here. There are probably harmful chemicals in the water you drink too, but unless they’re highly concentrated there’s no cause for concern.

Conclusion: Given the totality of the studies, it’s clear to me that no single food, including red or processed meats, causes cancer. So, my meat minions, beef on with confidence and pride. And go forth and continue to develop that delicious, nicely-textured crust on your steaks and burgers as well. Just don’t overcook anything, for fuck’s sake!

B.A.M. Episode 4: Herd Management & Health

Before we get further into the “meat” of these advocacy posts, it’s important to lay out a few basic terms and concepts that you might run into if you’re anywhere near the beef industry.

Animal Gender Terms

Heifer: A female that has never given birth to a calf.
Cow: A female that has given birth to at least one calf.
Bull: An intact male that still has his family jewels.
Steer: A castrated male.

Why do cattlemen castrate males? Well, it is one of three techniques used in herd management.

DSC04683

Herd Management Techniques

  1. Castration: Cutting the gonads off a bull is done for two reasons: (1) to control temperament; and (2) to improve meat tenderness. This process lowers testosterone. By lowering testosterone, farmers can reduce animal aggression as well as meat toughness. Castration is normally done within the first three months of life.
  2. De-Horning: Both males and females can grow horns unless they are genetically unable. By removing horns farmers can protect themselves and the herd from injury.
  3. Branding: The reason farmers brand their animals is to keep better records of individual animals, and to protect and identify their herd in the open range or at the marketplace. In the old days, this would also deter cattle theft.

Generally, if things are timed correctly with calving season, these three herd management techniques are done all at once, in one quick procedure, which results in less stress for the animal.

Calving

Calves need colostrum, a nutrient-rich version of mother’s milk, because it’s packed with beneficial vitamins and natural immunizations. But after some time, it becomes prudent to ween them off their mother’s milk and send them out to eat in the pasture. In most cases it’s as easy as putting the calves on the other side of a split-rail fence from their mother; they will still be in contact with one another, but the calf will eat grass instead of milk.

DSC04728

Contrary to popular myths, calves are not born and then immediately rigged up to some bio-mechanical factory farm machine where they can’t move and are force-fed until the moment they are slaughtered. These are myths.

Animal Health

Just like humans, animals need help every so often to fight off a bug. When sick, their ears droop, they cough, have runny noses and they separate from the herd and go off by themselves. Some diseases can be avoided through the use of vaccines, and illnesses can be prevented and combated with the use of vitamins and antibiotics.

Beef Quality Assurance guidelines limit the location of vaccination shots so that the process doesn’t harm the meat by piercing valuable muscle groups. In addition, beef safety laws require no trace of the stuff to be present in meat prior to slaughter (you must wait a certain number of days before  sending the animal to slaughter), and that little to no antibiotics that are given to the herd are in the same class as human medicines (to prevent a reduction in the effectiveness of antibiotics needed to treat human diseases).

Last, grain finishing allows for the animals to go off to slaughter sooner, when the animals are healthier and younger than grass finished animals.

B.A.M. Episode 3: Raising Cattle

Once again I am going to dedicate this post to dispelling some common misconceptions about the beef industry. Some of the biggest fabrications I hear these days is that the US beef industry is chock full of “factory farms,” where thousands of cattle are born and raised on feed lots, jammed into tight spaces, given nothing but grain and hormones for sustenance, and are generally mistreated and abused whilst farmers destroy the natural environment. ALL FALSE.

DSC04679

Most people don’t know that 97% of the 619,000 beef farms in this country are small, family owned operations with an average of 50 head of cattle. There goes the factory farm myth. And beef farming makes up about 29% of all US farms, in case you were wondering.

“Calving,” or the birthing of cattle, generally happens in a different area of the farm, removed from the feed yard, where farmers and veterinarians can more closely monitor the animals and keep them healthy. Once the calves are weened from their mother’s milk, they are put out in the pasture to eat grass and grow. Born and raised on feed lots? Screw that “bull crap.”

DSC04710 test edits

Cattle in the US are grass-fed in pasture for the majority of their lives. Don’t believe what you hear to the contrary. The development of grain feeding started way back, when the addition of grain into the animals’ diets was done to supplement meals for cattle during winter months and times when there were less live, growing grasses for cattle to eat. It was often mixed with stored hay silage as well.

Farmers noticed that the addition of grain to the diet caused cattle to grow faster. So today, grain is used for finishing and fattening up the cattle in the last months of their lives, prior to slaughter. This adds flavor content to the meat in addition to getting them up to a profitable weight for the marketplace. Grass finished animals (animals that only eat grass for their entire lives) take longer to get up to market weight, and are therefore older when they go to slaughter. That means they have to survive more winters and tough out more illnesses before getting to your dinner plate.

Jammed into crowded spaces? Nope. While cattle can withstand cold temperatures, farmers started using barns and other fully or partially enclosed shelters early on to shield their animals from the harsh weather in winter.

DSC04703 sepia

DSC04667

They found that cattle naturally gravitated toward one another anyway. They are social creatures. Even in pasture, when they’re out in wide open spaces, you will still see them huddled up together. Bison/buffalo do this as well. They even do it on the feedlot, where each animal has about 125-250 square feet of space, on average, in the US. Another myth bites the dust.

DSC04683

Now let’s discuss the environment. The US beef industry grasslands account for nearly 75% of US natural wildlife, and cattle spend a majority of their lives feeding on these natural grasslands. Up to 85% of our grassland in the US is actually not suitable for farming crops due to soil characteristics, topography, or rainfall. So cattle grazing is a good use of the otherwise inarable land that doesn’t do any additional harm. Lastly, bovine digestive systems are perfectly set up to convert the inedible plants on these grasslands into protein; beef that humans can eat!

DSC06489

I think that’s a good start for now. I’ll address animal care and animal health in the next BAM.

B.A.M. Episode 2: Beef Nutrition

There are a ton of misconceptions in the world of beef. One of the biggest going around today is that consuming red meat is somehow bad for you. It’s fat. It’s poisonous to your body. It lacks nutritional value. Give me a break! Beef is nutritious and good for you! Let me just attack some of these points here for you guys in this article, which is my second installment of Beef Advocacy Mondays (BAM).

First the fat: The beef of today is leaner than it was in the past, due to genetic selection of certain characteristics for over four decades throughout the beef supply chain. Sirloin, for example, is 34% less fat today than it was in the 1960’s.

About 66% of beef cuts are considered lean cuts today, and a part of that is due to the fact that there has been an 80% decrease in external fats on grocery store meat cuts.

DSC05717

Most saturated fat from beef is located in the outer portions of fat, located externally from the muscles that we eat. The marbling, or intra-muscular fat, does contain saturated fat, but a third of it is steeric acid, which is cholesterol neutral. Beef also contains mono-unsaturated fat, which is the same kind of fat content you get from olive oil or avocados – the good fats, in other words. What this means is that if you trim your beef of any external fats before cooking and choose a lean cut, you’ll end up discarding most of the remaining “bad” fats and retaining the good fats.

20140322_091905_LLS edits

I’ve thrown around the word “lean” a bunch of times here already. There’s actually some unpacking to do here. The term “lean” means that the beef has 4.5g or less of saturated fat per serving, and 10g or less total fat per serving. Leanness is mainly a function of the grade of beef (prime or choice vs select) and the location of the cut (rib vs sirloin or tenderloin), as opposed to farming and production methods (grain finished vs grass finished).

Okay so aside from fat content and leanness, I also mentioned that beef is nutritious and good for you. Here’s why: Beef contains 10 essential vitamins and minerals that are abundant in each serving. Most notably, it’s an excellent source of iron, B-vitamins, protein and zinc, but beef is a good or excellent source for all of the following:

  1. Protein: 48% daily value
  2. Vitamin B-12: 44% daily value
  3. Selenium: 40% daily value
  4. Zinc: 36% daily value
  5. Niacin: 26% daily value
  6. Vitamin B-6: 22% daily value
  7. Phosphorus: 19% daily value
  8. Choline: 16% daily value
  9. Iron: 12% daily value
  10. Riboflavin: 10% daily value

A 3oz serving of beef averages just 150 calories, and contains 25g of protein (48% daily value). You can imagine how great this is for building and repairing muscle after a hard workout or a long run.

Plant based proteins don’t provide all the amino acids that beef provides. Essentially they’re “incomplete” proteins. Let’s take beans, for example: You’d need to consume 371 calories worth of beans to obtain the protein content found in just 170 calories of beef. And peanut butter? Even worse. With that we are looking at nearly 600 calories. At that point you are blowing through your daily allotment of calories too fast, and you are not being satisfied in the meal.

With beef, you spend fewer calories for equal if not better nutritional content. In other words, beef is the better buy, the most bang for your buck. And it has been scientifically shown that consuming meat proteins actually has a satiating and hunger-satisfying effect on a person. I know I have perceived this phenomenon. On days when I have tried to eat veggies only, I ended up over-eating because I couldn’t ever seem to feel satisfied. Screw that. Give me some damn meat!

DSC05726

Grass-finished animals, or animals who exclusively eat grass and not grain for their entire lives, produce meat which also contains more Conjugated Lineolic Acid (CLA). This has been linked to long term weight management, and is thought to have health benefits that help combat a host of diseases, including cancer and heart disease. You just have to be careful with some of the research here, as many proponents of the grass-fed trend are very quick to bash anything that has to do with grain feeding without having the full picture. While I generally don’t particularly fancy the flavor of grass fed beef, the nutritional benefit of CLA is something to consider, and it just further strengthens the argument for consuming beef.

One caveat to this CLA business: The difference in CLA content between grass and grain -finished beef isn’t really big enough to justify excluding grain-finished beef from your diet. If CLA is what you’re after, maybe work some salmon into your diet, as that seems to contain more. But don’t forget to eat that yummy and nutritious beef either!

B.A.M. Episode 1: Beef Industry History

Happy Birthday America! What better day to start a new series of articles than the one celebrating our independence from tyranny?

This is the first installment of my B.A.M. posts. No, it’s not a damn sound, like Emeril’s ridiculous catch phrase. In these hallowed halls of meat, B.A.M. stands for Beef Advocacy Monday. My goal is to share something positive or educational about beef on each Monday, or at least once a month if I get lazy. Let’s see how long I can go before I run out of crap to talk about. I love beef, so I’m sure this will continue for quite some time. I’m a beef pusher! You all know I’m passionate about meat; so that’s the main reason I’m doing this.

But another reason I’m doing this is to combat the horrible “Meatless Monday” trend going on in the food world lately. I’m sorry, but the phrase “Meatless Monday” should have no place in the American lexicon. Why? Because we Americans pretty much revolutionized the beef industry to make it what it is today. We run the biz when it comes to beef. Yeah, yeah, yeah… we all know that Argentina, Australia, Brazil and Japan are responsible for some great beef as well. But come on, people. It’s the 4th of July, so I’m going to briefly talk about the USA and our vibrant beef history.

DSC04696

We have a rich beef history here, considering our relatively short time in existence as a nation. At first, beef was generally just slaughtered as needed. Most if not all beef was very fresh and hyper local. I’m talking 1600’s days here, and lots of the animals were really bred for dairy and milk rather than protein consumption.

Pork was different. Salting and smoking were common “packing” techniques that allowed pork to be preserved so that it could be transported away from localities and moved around as a commodity for sale. Cincinnati became a pork epicenter for this packing biz.

Beef never took off like pork did during those days, because cattlemen would have to drive their herd literally across the country to these packing and slaughtering hubs in order to get their product to the market. Not only was this a dangerous endeavor given our relations with Native Americans at the time, and given cattle thieves who would kill and steal for a herd, but the harsh weather conditions at various times of the year were also an issue. Cattle would die very often on these drives. This meant that ranchers were breeding their cattle to be able to survive the cattle drive rather than for flavor quality or meat grade.

It’s no wonder the industry wasn’t taking off. The market was not responding favorably to the product and there were too many obstacles in the way for farmers to make a good return on their investment.

It wasn’t really until the advent of the railroad system and the Industrial Revolution that the beef industry really began to flourish as a major part of the US economy. With the advent of railroads, cattle from the mid-west and Texas could reach the northeast and other major cities with ease. There were no more worries about whether the herd could survive the long journey by hoof. The animals were simply loaded into train cars and transported to places like Chicago, where, in 1865, the Union Stockyards overtook Cincinnati as the epicenter of the meat packing industry. Beef was, in turn, becoming a much larger piece of the American diet. The beef industry actually saw a 61% increase in beef consumption from 1850 to 1860. That’s huge.

Refrigerated train cars even began popping up as early as the 1850’s, allowing for slaughter facilities to be built and maintained closer to the farms, rather than near the packing centers in Cincinnati and Chicago. This eliminated the need for crowded animal transport, and allowed farmers to stay involved with the process from calving to carving.

By 1888, most farmers were breeding and feeding cattle to produce the best quality beef for taste rather than to survive the cattle drive north and east. As you can imagine, this made for much happier meat eaters.

The men who built America and the railroads – those mega-capitalist captains of industry like Andrew Carnegie, John D. Rockefeller and Cornelius Vanderbilt – were really the ultimate reason for this explosion in the beef industry. I thank them for their efforts.

But that’s not the end of it. We all remember learning about Upton Sinclair’s 1906 book The Jungle, which exposed nasty conditions within the meat packing industry. This eye-opening expose led to Congress passing the Federal Meat Inspection Act, which prevents adulterated or mis-branded meat and meat products from being sold as food. It also ensures that meat and meat products are slaughtered and processed under sanitary conditions.

Then, in 1967, the Wholesome Meat Act extended those federal regulations into the states. It requires that states have inspection programs equal to that of the federal government. These programs are administered by the Food Safety and Inspection Service (FSIS) of the Department of Agriculture (USDA).

In 1978, the Humane Methods of Slaughter Act amended the 1906 Federal Meat Inspection Act and created standards for the humane treatment of animals prior to slaughter.

Since then, various amendments and add-on regulations have honed the guidelines further and allowed for new information and scientific breakthroughs to better inform the whole process. In 1997, in response to a 1993 E. coli outbreak, many best practices guidelines came down the pike for reducing the incidence of food-borne pathogens in meat products. The Beef industry was the only industry to meet the goals of reducing food borne pathogens by half by 2010, and it intends to reduce that number by half yet again for 2020. And we are talking about a decrease in food borne incidents from 2.1% to 0.6%. These figures are much lower than other industries, like poultry.

In addition, in 2004 there were more guidelines and regulations introduced to address things like Mad Cow Disease. Now, inspections happen at every point in the cycle of the beef industry, from calving to animal nutrition on the pastures and in feed yards, to transportation requirements as the animals move to slaughter facilities, and even beyond, to the post-slaughter workplace conditions at packing plants, shipping facilities and grocery stores.

Taken together, the history of the beef industry and these important safety improvements have really created an atmosphere where the American beef consumer can feel confident that the product he or she is buying is safe, nutritious and delicious.

So go forth and heat thy grills for thy July 4th BBQ’s. Slap some burgers and steaks on there and enjoy! Then go blow shtuff up in the sky (safely, of course), because America rules.

Happy “Beefday” to “US.”

DSC04730

Get Your MBA: Masters of Beef Advocacy

The generous folks at Beef.org offer a free set of five online course modules, after the taking of which you become an official Master of Beef Advocacy. I discovered this by poking around their website one day. After reading more about it, I decided to fill out the application.

This was an ideal opportunity for someone like me, who spends so much time thinking about, writing about, photographing and eating beef. I mean, I have the “CC” after my name for “Carnivore Connoisseur,” which is completely made up, so I figured I might as well try for the official Beef.org certification as well! It would lend a bit more legitimacy to my screeds on here, no?

Anyway, a few days later I received my acceptance letter! Soon after, I began taking the module courses. The courses are as follows:

The Beef Community: an overview of how to talk to consumers about the way beef is raised from pasture to plate. It focuses on the community of people involved throughout the beef life-cycle.

Raising Cattle on Grass: this introduces the student to the first step in the beef life-cycle and the benefits of raising cattle on America’s vast grass pasture resources.

Life in the Feed-Yard: this course is a discussion of the role of feed-yards, including animal care, nutrition and environmental stewardship or sustainability.

From Cattle to Beef: this is an in-depth look at the slaughter process and the humane handling and safety measures that are in place today at beef processing facilities.

Beef – It’s What’s for Dinner: this module is a primer on choosing and cooking the right cuts of beef, and the important role that beef plays in a healthy diet.

What you come away with from these courses is a ton of valuable information about how to address consumer concerns regarding issues like hormones, antibiotics, grass and grain finishing, GMO feed, choosing cuts of beef and cooking.

wp-1466185789398.jpg

Anyone who is a big fan of steak, like me, should think about investing some time into these free courses. I’m a big proponent of knowing a lot about what you are eating. And not only are you getting a ton of info here, but you are also having various health myths dispelled in the process.

NCBA_MBA_Logo-01

Beef most certainly IS what’s for dinner. At least in my gut anyway. And knowing what I know now, after taking these courses, I’m going to keep it that way.

Meat 201

Meat 201 is an advanced examination of the four major cuts of beef that you’re likely to see at a steakhouse. The four major cuts are Filet Mignon, Strip Steak, Porterhouse and Rib Eye. For more general information about these cuts, and for information about other cuts of beef, please see my MEAT 101 and MEAT 102 posts.

1. Porterhouse

Etymology: There is some difference of opinion on the origin of the word “Porterhouse,” with several restaurants and cities claiming to have created the name. For example, Martin Morrison served large T-bones in his Pearl Street (Manhattan) “Porter House” around 1814. This history was popular in the late 1800’s, but some say a Cambridge, Massachusetts proprietor by the name of Zachariah B. Porter added his name to the steak. Still, others argue that the Porterhouse name stems from various 19th Century U.S. hotels or restaurants called Porter House, such as the Porter House Hotel in Flowery Branch, Georgia.

Anatomy: The Porterhouse is a cut of steak from the short loin portion of the animal that contains both strip loin and tenderloin meats. See the highlighted portion in the diagram below:

It is cut from a lumbar vertebra that is sawed in half through the vertebral column.

The downward prong of the “T” is a transverse process of the vertebra, and the flesh that surrounds it (spinal muscles) makes up the meat of the Porterhouse.

DSC02003 illustrated watermark

Essentially, it is a large T-bone steak from the rear of the animal that has two different types of meat (tenderloin and strip loin), one on either side of the “T.” In the picture below, the strip loin or Strip Steak is on the right, and the tenderloin or Filet Mignon is on the left.

DSC03188

The small semicircle at the top of the ‘T’ is half of the vertebral foramen, which is the name of the hole that passes through each vertebra for housing and protecting the spinal cord. They run the whole way up the back, all the way up to the brain of the animal.

The anatomy of a Porterhouse differs from that of a T-bone only in that the Porterhouse contains a larger portion of tenderloin than its T-bone counterpart.

This is primarily due to the fact that Porterhouse steaks are cut from further in the rear of the animal, from lumbar vertebrae, where the tenderloin is much thicker. Experts differ, however, on how large the tenderloin must be to differentiate a Porterhouse from a T-bone. The U.S. Department of Agriculture’s Institutional Meat Purchase Specifications state that the tenderloin of a Porterhouse must be at least 1.25 inches thick at its widest, while that of a T-bone must be at least 0.5 inches.

Here is a shot of a short loin with multiple vertebrae still intact and not portioned out into individual Porterhouses and T-bones.

You can see on the left there is a good sized, thick portion of tenderloin. That thins down as you move the the right, and seems to disappear by time your eyes reach the far end of the cut.

Just to drive home the anatomy a little more, here is a great excerpt and image from Russ Cooks:

“Up close and personal, this is where the T-bone fits.

t-bone-illustration
photo credit: http://www.russcooks.com/images/t-bone-illustration.png

The black line across the top of the two T-bones pictured here is the outside (top of the back) of the steer. You can see the T-bone in the schematic illustration higher up on this page as the topmost part labelled Rib. Above the ribs, what you touch if you pat the steer’s back, is the New York strip. Beneath the ribs is the tenderloin from which a filet mignon is often cut. T-bone steaks cut closer to the shoulder are known as Porterhouse while those cut closer to the loin are just T-bones.”

Preparation: Most times, T-bones and Porterhouses are either grilled, seared in a pan, broiled or blasted with high heat in specialty steak ovens made for charring the outside of the meat without over-cooking the inside. Butter is essential, and heavy seasoning is important as well. Herbs and garlic help boost the flavor too.

DSC07247

Flavor: Since this cut contains both the Filet Mignon and the Strip Steak, I refer you to the flavor sections for those cuts below, with a notation that the bone being left in often adds a more robust flavor while helping to retain tenderness and juiciness. These are very popular items at steakhouses because they can be cut large enough to feed anywhere from two to four people. Additionally, with two different types of meat in one steak, one can vary the flavors that one experiences with each bite.

2. Filet Mignon

Etymology: Filet, in culinary terminology, means boneless. Mignon, in French, means dainty or small. As such, this is a steak ideally suited for chicks: small/dainty, and with no bone.

DSC05717

Occasionally on a steakhouse menu you will see a “bone-in filet.” Given what I just mentioned above, that phraseology is completely self-defeating and confusing, as it simultaneously means both “bone-in” and “boneless.” However, it seems this sort of language is becoming commonplace. If it were up to me, I would prefer “bone-in tenderloin” to be listed on menus instead. There is no wording conflict with that phrasing, and it is an accurate description of what is being presented. In other words: all Filet Mignon is tenderloin, but not all tenderloin is Filet Mignon.

Anatomy: Traditionally, a Filet Mignon was cut from the anterior end of the tenderloin. In the beef chart image below, you can see a portion of the tenderloin section highlighted in red.

diagram-filet-cut-1500

That is where Filet Mignon was typically located, though most butchers label all steaks cut from the tenderloin as Filet Mignon (this allows for larger portions). The tenderloins run along both sides of the spine. They taper from thick, in the posterior of the animal, to thin in the front.

In their unbutchered form, they contain what’s called the “silver skin” still attached to the flesh. This is a thick connective tissue that is pretty much inedible. When butchering the full tenderloin, you will want to slice that off (it is NOT tender).

While this next photo is a repeat shot of a lamb vertebra Barnsley chop (the mutton chop from Keen’s), the anatomy is exactly the same for beef. This will illustrate exactly where the filet comes from. Essentially this is a double porterhouse, with a filet and a strip on each side. In addition to understanding the Filet Mignon, this image is useful in demonstrating the anatomy of the Strip and Porterhouse cuts as well, since they all come from the same place – the vertebrae of the animal:

DSC02003 illustrated watermark

Preparation: Preparations of this cut vary greatly. You may see this cut sliced thin and pounded flat, served raw for carpaccio. You may also see it finely chopped for tartare. A simple pan sear with butter and herbs, however, is probably the most common preparation.

Yet another style is Chateaubriand, which is a large section of the thick portion of the tenderloin that is roasted boneless, then sliced and served with a reduction sauce.

DSC03866

There is also Beef Wellington, which is a portion of tenderloin that has been coated with pate and then wrapped in puff pastry dough prior to cooking.

Flavor: Widely considered the most tender and least fatty cut of beef on the animal, the flavor should be uniform from one end to the other, with very tender and soft texture the whole way through. There is hardly any fat content in the standard cut of Filet Mignon. Some chefs will wrap the filet in caul fat (a lacy, fatty, web-like membrane that surrounds the stomach of an animal) before cooking. The webbing melts away during cooking and imparts a fat flavor into the meat. But it is more common to use things like butter, or to wrap a filet in bacon to add the fat flavor into the meat.

3. Strip Steak

Etymology: According to the National Cattlemen’s Beef Association, this steak is marketed under various names, including Ambassador Steak, Club Steak, Hotel-Style Steak, Veiny Steak, Kansas City Steak and New York Strip Steak. Delmonico’s offered Strip as a signature dish way back in the early 1800’s. Due to the cut’s association with NYC, the New York Strip Steak name was born.

Anatomy: The Strip is cut from the other side of the tenderloin, across the vertebra on the T-bone or Porterhouse.

DSC02821

Also known as strip loin, the Strip Steak is cut from the short loin part of the animal, from a muscle that does little work, like the Filet Mignon. It is generally more tender than the similarly situated but more posterior-located sirloin section of the animal. While it is essentially the same kind of meat as sirloin, the muscles in the rear do a bit more work than the short loin, so can be a bit more tough.

Preparation: For me, the Strip is best at medium rare, to preserve the tenderness and reduce any mealy or grainy textures that can develop from overcooking. It is always best to get a really great quality cut for this chop, something prime+, as all the intra-muscular fat, or marbling, will become soft and the muscle will tenderize all over.  You will often see it marinated or rubbed with spices, to impart additional flavors, but grilling and broiling in the traditional style is fantastic as well, especially with butter and herbs.  It can be served bone-in or boneless. Leaving the bone in will impart more flavor and help with the cooking process, since the bone conveys heat into the center of the meat while locking in juices.  At home, marinade this puppy in something like soy sauce and garlic, and slap it on the BBQ for a few minutes on each side and you will have the perfect home-cooked steak.

Flavor: This cut contains fat in levels that are somewhat in between the tenderloin (virtually none) and the Rib Eye (plenty of good, melty fat). Like the tenderloin, there is little variation throughout the cut, so the flavors and textures are more uniform for the Strip Steak, unlike the Rib Eye which has varying textures and flavors from one end of the cut to the other. The texture of a Strip can sometimes be a little bit grainy or mealy, and a bit more tight than a Filet Mignon or a Rib Eye – especially if it’s cooked too much.

4. Rib Eye

I’ve saved the best for last. The Rib Eye is the most ultimate of steaks, period. It is an awesome cut of beef.

Etymology: The etymology on this is pretty self-explanatory. The “rib” part of the name is because this cut of meat is connected to a rib bone. The “eye” part of the name is a reference to the circular, more centrally located portion of the cut that is more uniform than the outer portions of the cut. You will likely see the Rib Eye steak, or rib chop, called by many names.

For example, the Cowboy Rib Eye is a bone-in version of the cut:

There’s also the Tomahawk Rib Eye, which is so named for its resemblance to a Tomahawk-style hatchet. When butchered, a long “handle” of rib is cut clean to expose the bone (it is “Frenched,” as they say), and the steak meat is left at the end of the handle to form the hatchet blade:

Here’s a shot of my buddy; he’s about to get clobbered with a Tomahawk Rib Eye by Chef Josh Capon at Bowery Meat Company:

There’s also the Delmonico cut, otherwise known as a Scotch Filet. Applying what you’ve learned here, you can probably guess that this cut is boneless (filet means “boneless” in French). Delmonico’s claims this cut as their own because they named a house special boneless cut Rib Eye steak after their restaurant, way back in the early 1800’s when they first opened.

Anatomy: The rib section of beef spans from ribs six through twelve, and, obviously, hails from the rib section of the animal.

Rib Eye steaks are mainly composed of the Longissimus dorsi muscle (the “eye” portion of the steak) and the Spinalis dorsi muscle.

The more anterior your cut, the more Spinalis you’ll find in the steak. The Spinalis is the coveted cap of meat that wraps around the fatter end of the steak and usually has much more marbling than the rest of the Longissimus eye, or interior of the steak. That “fat cap” is also sometimes butchered away from the remaining eye.

photo credit: http://www.acookblog.com/wp-content/uploads/2011/03/IMG_7574.jpg

Highly skilled butchers know how to remove it from its position across an entire standing rib roast section of ribs, so as to keep it all together as one giant cut. But then that ruins the rib chop, in my opinion, since you’re taking away the best part. Some steakhouses have taken to tying several Spinalis cuts together in a spiral formation to create an all-fat-cap steak. Bowery Meat Company has one such cut, which they call the Bowery Steak:

STK also offers one on special from time to time:

DSC05705

DSC05726

The Spinalis has a more intense marbling, and, thus, much more flavor and tenderness. If you are so bold, the next time you order a Rib Eye at a steakhouse, ask for an anterior “chuck side” cut that has more of this fantastic Spinalis muscle.

Preparation: There are a ton of ways to prepare a rib steak. The most comon forms are searing in a pan, grilling, or broiling. Another common method of preparing this kind of meat is roasting. A “standing rib roast” is a section of Rib Eye steaks that has not yet been portioned into individual steaks.

DSC08474

When this rack of ribs is roasted slow and low to a pink medium rare, the end product is called Prime Rib.

It then gets sliced out into portions for individual consumption. This is a mammoth cut that we got from Burger & Barrel:

I know what you’re wondering, and the answer is Yes: Prime Rib and Rib Eye steak are the same exact thing. They are just prepared differently, using different cooking methods.

Cheaper cuts of rib steaks are actually the most common type of beef found in Philly Cheesesteaks as well. The meat is cut super thin and then cooked on a flat top with cheese, onions and other toppings, then shoved into long sandwich bread (incase you’re an asshole who has no fucking clue was a cheesesteak is).

Side Bar: is a Philly Cheesesteak better than a Cheeseburger? I think so… Man… Now I’m hungry for both…

Flavor: This steak has a high fat content, and that makes it very important to have a quality cut of beef, or an aged cut of beef. In high quality and aged cuts, this fat will render out or melt away much easier during the cooking process. This will impart a tremendous amount of flavor into the steak, and it will leave the remaining flesh with a very tender and soft texture. Don’t be afraid of the fat. Fat is not the same as gristle. Fat is good. Fat is your friend. Any good butcher will get the gristle off and leave the good fat behind. And when that good fat is REALLY good, it’s like having a delicious beef jelly with each bite of steak.

As discussed above, the Rib Eye is really like having two steaks in one (The small Spinalis or fat cap, and the larger Longissimus eye). The Spinalis is soft, tender, has lots of fat flavor and sometimes develops a crisp during cooking. The eye is more dense, but still well marbled so that it retains intense flavor. The eye is more uniform than the Spinalis. So: two steaks in one, kind of like the Porterhouse. Plus, there’s a nice, meaty beef spare rib to gnaw on at the end, if you order a bone-in chop.

Since there is generally more fat and marbling in this cut across its entirety, you will get better flavors than with the tenderloin or Strip, in my opinion. Clearly, high fat content is not for everyone. If you want to avoid fats in your diet, then go with the tenderloin. I actually really enjoy the flavor of fat. Fat, now, is sometimes referred to as the sixth flavor sensation. There were always four: (1) savory, (2) sweet, (3) bitter and (4) sour. “Umami” claims to be the fifth, and is meant to encompass the earthy, funky, fermented flavor sensations that you experience with mushrooms, truffles, aged beef and blue cheese. I just dislike the word “umami,” so I use “earthy” instead. The sixth is “fat,” apparently, as decreed by various food people who get paid to sit around and do these things. I’m not sure how it works, but I seem to be able to recognize a distinct sensation on my tastebuds, along with a buttery flavor and slippery feel, whenever I eat shit like pork bone ramen or a Rib Eye steak. Maybe there’s something to it?

Anyway, I hope this was an informative and educational post for you meat minions out there. Knowing this shit, I think, is very important.

Wine Pairing Website Resource

A gentleman named Derek over at Wine.net reached out to me and asked if I’d feature his post on pairing white wines with steak. I know what you’re thinking: BLASPHEMY! RED goes with steak! But hang on a second… Chef John at The Pines recently paired a very white-esque rose with a Denver cut blade steak…

DSC08644

DSC08655

So is it really that absurd? After reading the post at Wine.net, and after my experience at The Pines, I don’t think it is anymore. Whatever works, right?

DSC09001_2

Anyway, upon further browsing the Wine.net website, I realized it was probably a worthy resource to share with my readers. So there you have it. Go poke around, especially if you’re a wine connoisseur. Shit, even if you’re an amateur like me, or just looking for something like what wine to pair with your Thanksgiving turkey dinner, this is a great resource. Check it out.

Scotch & Whiskey

This page is dedicated to the greatest liquor around: whiskey. Aside from a dirty, dry, gin martini, a glass of scotch and/or whiskey is probably the greatest thing to happen to the male sex since the discovery of female tits, ass and vagina. Read and learn all about these great accompaniments to dinner.

You may sometimes see it spelled “whisky,” or generically (and often erroneously) referred to as “scotch.” You might also see scotch lumped in with things like bourbon or rye. Shit, you’ll even see single malts confused with blends. But words have meanings, my friends, and this is where you will learn them, and where you will find my opinions about which are the best.

Terminology

Whiskey/Whisky: Whisky is alcohol that’s been distilled from fermented grain mash. All whiskey must be distilled at a minimum of 40% and a maximum of 94.8% ABV. The spelling is generally different based on which country it is from. A nice rule of thumb is that countries that do not have an E in their name do not spell whisky with an E. Examples: Scotland/Japan = Whisky; America/Ireland = Whiskey

Where Brooklyn at???
Where Brooklyn at???

Grain Whisky: Whisky made, at least in part, from grains other than malted barley.

Malt Whisky: Whisky made primarily from malted barley.

Irish Whiskey: Yup, you guessed it… whiskey made in Ireland. It must be distilled to an ABV of less than 94.8%. Additional rules are that it must be aged three or more years in wooden barrels, and if two or more distillates are used the whiskey must be labeled as a “blend.”

DSC01237

Scotch: The mash must be barley, it must be from Scotland, and it must be aged in oak barrels for three or more years at an ABV of less than 94.8%. Pretty simple.

Single Malt: Essentially this just means that the whisky is a product of a single distillery.  A single-malt Laphroaig may contain whisky from many barrels produced at their distillery, but it must contain whisky produced only at Laphroaig.

Blended Malt: Also known as vatted malts, these are a blend of single malts from two or more distilleries.

Single Grain: Very misleading. It means barley and one or more other cereal grains were used, produced only at a single distillery (similar to single malt).

Blended Grain: Blend of single grains from two or more distilleries.

Blended Scotch Whisky: A mix of both single malt whisky and single grain whisky, sourced from several different distilleries.

DSC01253

Single Barrel: This is a whisky from a single barrel, unmixed with other barrels. Very rare.

Bourbon: Grain mix must be at least 51% corn, and bourbons are from the USA and aged in new charred oak barrels. Straight bourbon is a bourbon that has aged two or more years. While most bourbon is made in Kentucky, it is not a requirement. Bourbon can be no more than 80% alcohol (160 proof) and no more than 62.5% when put into casks for aging in new charred oak barrels.

Tennessee Whiskey: Straight bourbon made in Tennessee and filtered through charcoal.

Rye: In Canada, there must be some rye in the mash. In the USA, however, there must be at least 51% rye in the mash, and they must be aged in new charred oak barrels. Like bourbon, straight rye is a rye that has aged two or more years. Rye can be no more than 80% alcohol (160 proof) and no more than 62.5% when put into casks for aging in new charred oak barrels.

Personal Preferences

I have two distinct likes when it comes to scotch. I enjoy the extremes of the spectrum: creamy and sweet like butterscotch, and super medicinal and peaty.

Let’s start with the peaty ones: Laphroaig 10 is like baseball glove leather, and I mean that in the best way possible. Very smokey and definitely an acquired taste. I absolutely love it.

DSC01242

That, Ardbeg (both the 10 year and the Corryvreckan) and Lagavulin are my favorite of the smokey, peaty varieties.

DSC01241

I have a great book called “Michael Jacksons Complete Guide to Single Malt Scotch” that I found to be very useful (Not Jacko – some other dude). It also rates them out of 100. Lagavulin 16 (their most common) gets like 96/100. That’s pretty fucking amazing for a bottle that typically costs $75-$100 (depending on how hard you are being raped in cities). Tasting anything higher ranked is going to cost you a shitload of scratch. In fact, I don’t think I’ve tasted anything rated higher than Lagavulin. Get it. It’s fucking totally mint.

For the smoother types: I like Macallan 18, Glenlivet 21, Balvenie Double Wood 12, and Glenmorangie 18.

DSC01239

That Glenlivet 21 is as clean as a freshly shaved snatch too, assuming there was a shower taken afterwards, and no STDs or weird rashes… One Christmas Eve I drank nearly half a bottle of GL21 and had no hangover whatsoever the next morning. Happy Birthday Jesus!!! The smoothies I listed here are all a bit more expensive (though Balvenie is not) but well worth it.

DSC01250

The Macallan and Glen Livet 12 years are nice to start with if you’d like to try something smooth as well, but I prefer the Balvenie Double Wood by far at that price point. They call it “double wood” because it has two hard cocks. No… because it is aged for most years in oak casks, but then finished in sherry casks, so it has a unique flavor.

DSC01240

Scotch Flavor Map

I came across this pretty cool chart thing a while back, and kept it handy for quick reference. This gives you a little visual of the flavor profiles people often discuss with scotch:

Map
From http://www.foodrepublic.com/2012/01/03/all-hail-scottish-whisky-flavour-map

Regions of Scotch Production

There are essentially four main regions of scotch production in Scotland, and each region has flavors that are often typically associated with their scotches.

Speyside: fruity and delicate. The valley of the river Spey is often associated with flavors like vanilla, honey, apples and pears.

Lowlands: fresh, light. These malts are fragrant, floral, taste of cereal and are light in color.

Highlands: smooth and floral. In the west, you have some maritime influence in the flavor, and in the central highlands you get some honey and heather.

Islay/Skye Islands: peaty and briny. These robust malts are laden with the medicinal / iodine aromas of the sea.

Drinking Tips

One thing I like to do: drink the first half of my glass neat, then throw one or two ice cubes in and allow the flavors to change. It’s like having two different glasses of scotch in one, because the ice and water allow the scotch to open up (kind of like wine), and different aromas and flavors can be more easily detected.

DSC01243

The ice sphere is so much cooler than the ice cube. The ice cube is such a square.
The ice sphere is so much cooler than the ice cube. The ice cube is such a square.

Another cool thing I learned at a tasting: splash a little scotch on the palm of your hand and rub your hands together like Mr. Miyagi. Then smell your hands. All sorts of aromas are unleashed. You’ll smell florals, vanillas, nuts, wood, etc. Very cool.

An interesting trick: suck air in through your teeth as you have some scotch in your mouth and on your tongue. The break-up and aeration of the liquid will release aromas and flavors that you might have otherwise missed.

Most important: take your time. I sometimes see scotch amateurs order a nice scotch and then shoot it fast. What a waste! Don’t be that fucking guy.

Organize a tasting: maximize your exposure to various scotches. If you’re anything like me, you have a bunch of buddies who love to drink. Chances are, a good crew of them dig scotch. Call them up and organize a scotch tasting. Everyone can bring their stash and you’ll have a really big selection to work with. Check out this selection we amassed last Christmas. Fuck yeah! I think we had 30 bottles total when a last minute arrival showed up, and it was something he brought back from China. Sweet!

1503256_10152024526138592_1458127122_n

A final note: scotch isn’t for everyone. Some people just don’t like this shit. Tastes are subjective, but tastes do change over time. I always hated tequila, for instance. But I respect the spirit and understand how tons of variety exists in the product lines. In fact I’ve recently started to come around to tequila through my enjoyment of aged mezcal. Maybe you’ll come around to scotch if your first impression is bad. Keep trying. You never know – your taste buds might have adjusted and now you might love scotch if you tried some good ones.

Other Resources

For a more in-depth dive into terminology, check out THIS SITE. Start at A, and work your way through Z. Do it. Don’t be a bitch.

Www.Maltmadness.com is a great resource, as is www.Malts.com. Whisky Magazine (out of the UK) is fantastic as well, also online at www.WhiskyMag.com.

You should also check out my post on the Whisky Advent Calendar. Needless to say that was a great December – a December to remember for sure.

day 24: master of malt 50 yr speyside (3rd edition)